We invite you to pay close attention to the following important information: The choice of the best motorcycle helmets are there now.
Choosing an ideal motorcycle helmet depends greatly on the safety standard that differs depending on the area in which you intend to ride as follows:
- Europe – ECE 22.5
- USA – DOT FMVSS 218
- Australia – AS 1698
- Japan – JIS T8133
- Brazil – NBR 7471
- India – IS 4151
- New Zealand – NZ 5430
- Snell M 2005
These are the standards according to the area. If we are to classify them according to safety, the ECE and DOT standards are the safest. Of course, from a legal point of view, you will need an ECE motorcycle helmet if you want to ride in Europe, which is considered safer than the DOT or the other standards.
If you do not want to complicate yourself too much or are not sure, choose an “all world” helmet or one that has the Snell standard. The latter is the strictest standard , but many specialists consider it exaggerated. This is because in the event of an accident so high that it rises to the standard level, the motorcyclist would die anyway due to internal injuries, so the skull protection so high loses its relevance.
The best motorcycle helmet should protect the skull and not only from at least four points of view:
Impact protection is the most important because a strong impact causes the most serious diseases. We refer directly to brain protection. At the time of a powerful stroke, due to the impact the brain tends to move rapidly inside the cranial box, which can cause serious internal injury.
This is why the helmet is provided inside with a combination of polystyrene linings , sponges and memory foam , all with the role of absorbing the shock as best as possible, thus preventing movement of the brain.
Or the abrasion protection, it also plays a big role in shock absorption. This is precisely why the motorcycle helmet is glossy . The material that exists on the outside greatly influences the price of a headset. Most people will tell you that the best motorcycle helmet is the one with the outer start of kevlar, which is a mix of fiberglass and carbon fiber.
They can cost up to 400 euros, while the cheap hard plastic wrap costs only 100 euros. In reality, however, the protection offered by one or the other is about the same, with the difference that those in Kevlar have the advantage of better dispersing the shock in case of impact.
The ideal motorcycle helmet should also offer anti-bullet protection or against objects that might behave like projectiles, such as small pieces of glass or small pebbles.
The last type of protection is against fire or high temperatures . This means that for at least a short period of time, the helmet must protect the head from high temperatures. This can happen if in the event of an accident you land with your head near the exhaust or engine.